Bending machine slider synchronous layout reference torque axis forced the same Published:2022-11-09

1. The synchronous layout of the slider of the bending machine refers to the forced synchronization of the torque axis.

2. Reference constraint block organization, quiet and accurate.

3. It refers to all welded steel structure with sufficient strength and stiffness.

4. The hydraulic cylinder is at both ends of the transmission, the saw is placed on the slider, and the slider is launched in a straight line.

5. Trap of wedge type deflection compensation to ensure high-precision bending.

6. Adjust the anxiety of the slider line quickly, manually fine tune, and exposure counter.

One month after the bending machine is awarded, check the damaged parts of each oil pipe, and there is no shape. If it is abnormal, it should be changed. After two months, fasten the connection of all parts. The progress and service should be closed, and the system has no pressure.

The hydraulic bending machine consists of support, worktable and clamping plate. The worktable is installed on the support. The worktable is supported by the base and clamping plate. During the setting process, the hinge clamping plate continues to support. The coil is closed by the shell and a cover plate. In autumn, it falls on a shell coil, and the top is covered with a cover plate.

When selecting the pressing plate of the coil, the gravity will explode, thus realizing the pressure plate and clamping on the plate base. The reason for this is that the electromagnetic force clamp can make many parts better, and can polish the prosperous side wall of the workpiece.