What should be paid attention to during the operation of the rolling machine Published:2022-11-09

The mission of mechanical bending machine in industrial production is self-evident. What should be paid attention to in its operation?

1. Only after the workpiece is placed stably and aligned can the machine be started and operated. The signal shall be clear and one person shall be designated for command.

2. Do not put your hand on the rolled steel plate, and do not use the sample plate to check the roundness. The sample plate can be used to check the roundness after shutdown.

3. When rolling the workpieces that are not round enough, a certain margin shall be reserved when rolling to the end of the steel plate to prevent the workpieces from falling and hurting people.

4. During operation, no one is allowed to stand on the workpiece, nor is it allowed to align the roundness on the rolled cylinder.

5. When rolling thick and large diameter cylinders or workpieces with large material strength, lower the moving roll a little and roll it for several times.

6. When rolling a narrow cylinder, it should be placed in the middle of the roll.

7. After the workpiece enters the roll, prevent hands and clothes from being drawn into the roll.